2015 CIVIC SI BASEMAP

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
SI RICO
Posts: 2
Joined: Wed Oct 17, 2018 8:28 pm

2015 CIVIC SI BASEMAP

Post by SI RICO »

Hi so I hate to ask but I would like to get a basemap for my current mods on my vehicle so I can atleast drive my car to my tuner next weekend on my day off. The base map I currently have loaded is the CAI, RBC MANIFOLD, FULL EXHAUST. I did mess with it a little bit to try and get my car to idle decently to fix my idle hunt and drive without it jerking every time I come off throttle but no luck since I lack the knowledge obviously. But I did manage to get it to idle steadly but once I press the throttle is hunts again. I checked for vacuum leaks and smoked tested system to find everything is sealed and good. I did attempt to relearn idle if that helps but throttle is really sensitive/aggressive so it was pretty much impossible. Any help will be appreciated.

Current mods:
ZDX THROTTLE BODY
PORTED RBC MANIFOLD
3.5 KTUNED SRI VELOCITY STACK
RDX INJECTORS
4BAR MAP
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: 2015 CIVIC SI BASEMAP

Post by Spunkster »

You should discuss a basemap with your tuners as they will be most qualified to assist you with this.
Post Reply