Hi,
I have an FN2 with turbo with cal RACE and I want to put AFM calibration using IAT sensor and to deactivate AFM, how do I convert the fuel tables for a correct operation?
regards
Convert tables Fuel MAP a AFM
Re: Convert tables Fuel MAP a AFM
You must make a fully retune!
2008 Honda Civic TypeR FN2
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Rotrex C30-94 supercharged with relocated IAT
Powered by ASNU 092/FP330E fuel pump & ASNU 090/750cc fuel injectors
------------------------
ECU: 37820-RSP-E02
Flashpro: FP-SI-INT-21153
Software: 3.6.1.0
Firmware: 185
Re: Convert tables Fuel MAP a AFM
Ok, it should be retuned, but can someone post some guidance which settings in the map itself are different? What we should be aware when doing this conversion?
I also have rotrex supercharged fn2 with race calibration, and would like to create one more map which is Hybrid.
If I copy/paste tables, will car be drivable for tuning, or safe at least?
I also have rotrex supercharged fn2 with race calibration, and would like to create one more map which is Hybrid.
If I copy/paste tables, will car be drivable for tuning, or safe at least?
Re: Convert tables Fuel MAP a AFM
Yes and yes. But use the vtc profile and ignition what I sent to you ;)
Lock cams 50 and Rev it at first to 5000 or 6000 RPM and watch the lambda is 0.80...
Adjust the fuel and repeat this for all other cam angles
Lock cams 50 and Rev it at first to 5000 or 6000 RPM and watch the lambda is 0.80...
Adjust the fuel and repeat this for all other cam angles
Re: Convert tables Fuel MAP a AFM
To work the AFM sensor has to be installed? Or can I remove it and have only the MAP sensor?
Re: Convert tables Fuel MAP a AFM
You can disable it, there really is no need to completely remove it. IT contains the IAT sensor so if you do remove it, you must wire in a proper IAT sensor as well.