Vtec oil pressure solenoid

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
mapuSOHC
Posts: 5
Joined: Sun Jul 13, 2014 7:57 pm
Location: PHILIPPINES

Vtec oil pressure solenoid

Post by mapuSOHC »

Hi,

Do i need to install a vtec oil pressure solenoid to my 2011 r18 civic?
a friend of mine who installed hondata like 2-3 years ago said he used a vtec oil pressure solenoid because a certain code i the system states that the engine cannot rev higher than 3,000rpm unless doing so..
RR with the weaponR
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Vtec oil pressure solenoid

Post by Spunkster »

FlashPro is not supported on R18 models outside the US.
mapuSOHC
Posts: 5
Joined: Sun Jul 13, 2014 7:57 pm
Location: PHILIPPINES

Re: Vtec oil pressure solenoid

Post by mapuSOHC »

I bought / ordered a USDM ECU along with the flash pro sir.
Is theres an option where we can just turn the code off?
the old flashpro (way back 2008) has no options to turn it off.
RR with the weaponR
Post Reply