K24 base map

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
Bull71
Posts: 1
Joined: Thu Feb 21, 2013 7:06 pm

K24 base map

Post by Bull71 » Mon Feb 25, 2013 2:38 pm

Hello All,(95 Civic Hatch)

I have swopped a K20A with a JDM K24A the car is running on the Hondata mod K20A ECU and Had to Change the Injectors off the K20 to the K24 due to one was bad I worried that it might be running Lean with the smaller injectors Should I Use and Load a Base map for the K24 and Chang the injector CC in the manager?

Please Advise

User avatar
Spunkster
Site Admin
Posts: 17759
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: K24 base map

Post by Spunkster » Mon Feb 25, 2013 3:25 pm

Yes this will need to be completely retuned for the new engine.

stevegarage
Posts: 2
Joined: Tue Oct 15, 2013 4:32 am

Re: K24 base map

Post by stevegarage » Sat Jul 12, 2014 6:22 am

i believe stock injector still capable of supplying the right amount of fuel. please advice moderator.

Post Reply