P2R spacer

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
nickd70s
Posts: 3
Joined: Sun Jan 27, 2013 8:41 pm

P2R spacer

Post by nickd70s »

i have the base map for my intake (AEM SRI) but i also have a P2R Throttle body spacer with 2 gaskets. any maps out there for these mods? ive attached a datalog idk if this helps please give me suggestions
Attachments
datalog0005.fpdl
(2.27 MiB) Downloaded 366 times
nickd70s
Posts: 3
Joined: Sun Jan 27, 2013 8:41 pm

Re: P2R spacer

Post by nickd70s »

bump for anyone with some information?
nickd70s
Posts: 3
Joined: Sun Jan 27, 2013 8:41 pm

Re: P2R spacer

Post by nickd70s »

still trying to figure this out anyone got some feedback?
Attachments
3 gear pull.fpdl
(128.71 KiB) Downloaded 325 times
mabo
Posts: 64
Joined: Sun Mar 18, 2012 2:21 pm

Re: P2R spacer

Post by mabo »

Youd better buy Sparco stickers , +5hp per small sticker, +9hp for a big yellow one on your rear windshield. Nice power , good looking, much cheaper than Flashpo and spacers. Dont miss a chance.
arraydude
Posts: 31
Joined: Tue Aug 13, 2013 8:25 pm
Location: Argentina

Re: P2R spacer

Post by arraydude »

you are running rich, very rich
Post Reply