Ctsc stage 1 I/h/e/fp

Calibrations for FlashPro Manager - Use all calibrations at your own risk (dyno tuning recommended)

Post Reply
David422
Posts: 5
Joined: Tue Dec 06, 2011 4:56 pm

Ctsc stage 1 I/h/e/fp

Post by David422 »

I just installed the new ct sc stage one. Trying to figure out why my rev limiter is so low at 7400. Do I need to upgrade my injectors to raise it? Or should I just buy the ct stage 2 kit and go that route? Injectors are roughly 400 and ct upgrade 439? Would this upgrade jeopardize my motor?
Top
Post Reply

Return to “FlashPro Calibrations”