What basemap should I use ?
Re: What basemap should I use ?
I couldn’t data log today due to rain , I will have it tomorrow tho for sure.
Re: What basemap should I use ?
Here is the datalog finally, hopefully it looks good.
- Attachments
-
- datalog0017.fpdl
- (5.67 MiB) Downloaded 67 times
Re: What basemap should I use ?
Well, not a fluke I guess, this one had one in the same area. Other than that it looked really good, so I made a few ignition adjustments in that area to hopefully remove it.
Re: What basemap should I use ?
Im not sure if this is the right datalog cause i had to delete the firsts one we did because of space. I did the datalog today but it didn't say datalog 18 but im thinking its datalog0 since i deleted the previous one. But i changed the name to 18. I did the WOT in the beginning so hopefully this one is it. I also refilled gas before this datalog.
- Attachments
-
- datalog18.fpdl
- (5.06 MiB) Downloaded 65 times
Re: What basemap should I use ?
Yeah it looks like it was one from today according to the date stamp.
Had a couple knock come back, I went back to the Rev08 family again in this next one, give this one a shot. Rev08.4, something seems to work better in this family so we will go back to it. We should be there on this one. I mean in the grand scheme of things a few knock is no big deal, just trying to get us to 0 if possible.
Had a couple knock come back, I went back to the Rev08 family again in this next one, give this one a shot. Rev08.4, something seems to work better in this family so we will go back to it. We should be there on this one. I mean in the grand scheme of things a few knock is no big deal, just trying to get us to 0 if possible.
Re: What basemap should I use ?
Same thing again, i don't know if this is the correct datalog. I will try to re organize everything. But hopefully this is it.
- Attachments
-
- datalog19.fpdl
- (5.34 MiB) Downloaded 69 times
Re: What basemap should I use ?
Yeah it looks like it. Says on the timestamp 2:13 today.
That one looked really good. Part throttle and idle fueling are great, WOT fuel is dead on. We had one knock, but it was on a take off from a stop where the rpms fluctuated a lot while letting the clutch out. So go ahead and make another datalog when you can with this same calibration and we'll see how it looks again. I think we're right on the brink with this 8.x revision family, so we're right there. I just want to see how we look over the next few days of making datalogs with this one. it's 99.9% there!
That one looked really good. Part throttle and idle fueling are great, WOT fuel is dead on. We had one knock, but it was on a take off from a stop where the rpms fluctuated a lot while letting the clutch out. So go ahead and make another datalog when you can with this same calibration and we'll see how it looks again. I think we're right on the brink with this 8.x revision family, so we're right there. I just want to see how we look over the next few days of making datalogs with this one. it's 99.9% there!
Re: What basemap should I use ?
Again got lost with these datalogs haha. I hope this is the one from today.
- Attachments
-
- datalog0020.fpdl
- (5.34 MiB) Downloaded 62 times
Re: What basemap should I use ?
Looks good again. Had one knock under the same exact scenario. Not much I can do to stop that one, but I made an adjustment to the ignition table a little to try to stop it. It happens when you're taking off from a light letting the clutch out, hopefully the change I made will get rid of it. If it is something that is persistent, it's no big deal, just trying to remove it if possible for you. It won't impact drivability either way.
Re: What basemap should I use ?
Here is the datalog. Hopefully this is well. Thank you!
- Attachments
-
- datalog0021.fpdl
- (5.4 MiB) Downloaded 67 times
Re: What basemap should I use ?
Had a few pop up again. Take this one for a spin when you can. I'm really trying to find the brink of the knock so we don't take too much out. We'll see how this one looks.
Re: What basemap should I use ?
Yea i understand , it feels good though, i'm enjoying the car a lot more. Hope this one is good. Thanks again!
- Attachments
-
- datalog0022.fpdl
- (4.71 MiB) Downloaded 71 times
Re: What basemap should I use ?
Looks good. Still had a couple knock, I think we might be dealing with a case of false knock at this point. If it doesn't go away in this next one, we will have that discussion and see how you feel about what we have to do to fix the issue. But let's try this one and go from there.
Re: What basemap should I use ?
Heres the datalog for today, hopefully this looks good. Thank you! Ill try to respond as soon as i can cause on some datalogs like i get a email for example at 12, but on the forum it says you posted at 9.
- Attachments
-
- datalog0023.fpdl
- (5.35 MiB) Downloaded 56 times
Re: What basemap should I use ?
That one looked great. No knock, everything else looked great. Go ahead and make another datalog when you can and let's see if it stays knock free. As long as it does that, everything else looks great and we're looking good. Fingers crossed for the next one.