ls basemap

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Locked
PhrequenC
Posts: 6
Joined: Thu Jul 24, 2008 10:34 pm

ls basemap

Post by PhrequenC »

ls basemap with 2.5" catback and intake 7lb flywheel stg2 clutch

i guess like a "tune" for that kind of stuff.

never did tuning before so idont know whats possible
inteGReddy
Posts: 31
Joined: Thu Apr 19, 2007 1:41 pm

Re: ls basemap

Post by inteGReddy »

PhrequenC wrote:ls basemap with 2.5" catback and intake 7lb flywheel stg2 clutch

i guess like a "tune" for that kind of stuff.

never did tuning before so idont know whats possible
kindve late to be responding but you should be fine using the stock b18b1 basemap which is included with smanager. i doubt the 2.5 catback exhaust and intake are going to cause you to be leaning out too much neway because the stock ex. manifold only has a 2.25 outlet on it. and the lighter flywheel isnt exactly going to change much because the fuel maps are based on load neway.
Locked