B20b turbo datalogging questions and help

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

B20b turbo datalogging questions and help

Post by richardmichalski19 »

can someone help me with this datalog it was running ruff and dien out and kept on throwing code 9 and i just replace the distributor
and still pops the code 9
gsr head type r intake cam
1000cc precision injectors
victor x intake
bwr ram horn turbo manifold
precision t3t4 turbo
tial waste gate 6lbs
tial bov
unleaded fuel
3 inch exhaust all the way back
aem wide band
mac turbo selnoid
hondata s300 v2 de the car is dumping way to much fuel and running ruff.
Attachments
first start 6-16-21.s3d
(1.14 MiB) Downloaded 116 times
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: B20b turbo datalogging questions and help

Post by Spunkster »

You need to resolve the CYP error. It is either the wiring, distributor, or the ECU is damaged. You should try your ECU in a known working vehicle.
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

i got the code to go away now im reading 15 vaccum at idle and its dumping fuel pretty good trying figure out to adjust the fuel map!
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

im trying to get my b20vturbo to be safe to drive to the tuner any one can get me a base map for my set up i attached my data log
tell me what u think i should do
Attachments
2nd run with out code 9.s3d
(1009.38 KiB) Downloaded 90 times
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

here is another one
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

not sure what im doin yet learning as i go inputplease
Attachments
3rd run.skl
(52.9 KiB) Downloaded 95 times
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

WELL THIS MAKES THE CAR RUN
Attachments
richard_michalski_28868 (2).skl RUNS ISSUES WITH FUEL.skl
(47.64 KiB) Downloaded 88 times
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

CAN SOME ONE LOOK AT THIS AND TELL ME WHY THE CAR IS DUMPING SO MUCH FUEL AND WHY MY VACUUM IS AT 20 AT IDLE
Attachments
RUNS BUT DUMPS FUEL STUMBLES.s3d
(4.23 MiB) Downloaded 102 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: B20b turbo datalogging questions and help

Post by CalibratEd »

Have you entered the proper data for the injectors and MAP sensor? If so this is not a bad start. You will have to lean out the fuel table. Make sure you do not apply changes during warm up. I would also deactivate the boost solenoid for now. Make sure the car has reached operating temperature.

-Ed
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

here is the last upload that i have still dumping fuel please help me out ed
Attachments
richard_michalski_28868-B (1).skl
(47.65 KiB) Downloaded 77 times
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

this is the datalog warmed up let me know what you all think
Attachments
running warmed up and dumping fuel still.s3d
(1.24 MiB) Downloaded 77 times
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

most recent datalog was running but ruunig ruff and rich i think that the injectors i have are 1000cc precision i am stuck please some one help me with this issue look at the graph at idle when i rev it up a lil it wants to stall after i give it fuel.
Attachments
richard_michalski_28868 (1).skl8-3-21 running rich surging.skl
(47.66 KiB) Downloaded 76 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: B20b turbo datalogging questions and help

Post by CalibratEd »

Richard,

Create another datalog after the coolant temp has reached above 170F. The car seems to be running very rich but I only recommend making changes after it has reached above 170F due to start up enrichment.

-Ed
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

ok i will get it to the operating temps and will do my best how long should the data log be ?
richardmichalski19
Posts: 46
Joined: Sat Dec 13, 2014 6:40 am

Re: B20b turbo datalogging questions and help

Post by richardmichalski19 »

here is last nights warm up and idle run data log she was surging a lil and dumping lots of fuel still can figure out why
Attachments
8-5-21 running surging a lil dumping fuel alot still heated up 173 degrees.s3d
(2.34 MiB) Downloaded 85 times
Post Reply