d16a6 vitara 750cc 20psi

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
gcult710
Posts: 4
Joined: Fri Jan 01, 2021 11:12 am

d16a6 vitara 750cc 20psi

Post by gcult710 »

just picked up a crx with a 75mm fj/Vitara build, comp cam, springs retainers, .70ar turbo, rc750 injectors, mac solenoid @6.1%(15 psi spring on wastegate)18-20 psi total. car has a lot of crankcase pressure and am rebuilding the engine but can someone look at this tune and let me know if its ok to run the car? its the tune the car came with.
Attachments
crx vitara 91 gas.skl
(50.61 KiB) Downloaded 154 times
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: d16a6 vitara 750cc 20psi

Post by CalibratEd »

Visually there is overlap in the fuel table which is unusual. To better inform you on how the car is running you need to post a datalog of the car running this tune.

-Ed
gcult710
Posts: 4
Joined: Fri Jan 01, 2021 11:12 am

Re: d16a6 vitara 750cc 20psi

Post by gcult710 »

ive been trying to street tune using the percent adjustment feature. here is my current calibration and datalog
Attachments
remote fix jimenez datalog!!!!!!!1.s3d
(259.55 KiB) Downloaded 110 times
fixed remotely jiminez !!!!!!!!.skl
(51.02 KiB) Downloaded 119 times
gcult710
Posts: 4
Joined: Fri Jan 01, 2021 11:12 am

Re: d16a6 vitara 750cc 20psi

Post by gcult710 »

currently just running wastegate pressure at 14psi.
gcult710
Posts: 4
Joined: Fri Jan 01, 2021 11:12 am

Re: d16a6 vitara 750cc 20psi

Post by gcult710 »

Someone let me know if the timing is to advanced in boost plz
Post Reply