b18b1 turbo basemap needed 7psi@1000cc@340lph

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Projekt2nr
Posts: 8
Joined: Thu Feb 11, 2016 3:42 am

b18b1 turbo basemap needed 7psi@1000cc@340lph

Post by Projekt2nr »

hey guys i just picked up a s300 in a p75 i need a basemap made please

auto to manual conversion

2001 b18b1 stock longblock
gsr? lsd trans no identifiers other than ysk
skunk2 proseries gasket, manifold 70mm throttle body
schedule 40 ram manifold
rev9 tx-66-62 antisurge t3 turbo
3" exhaust
bk7re ngk spark plugs gapped to .020
tial 40mm mvr running 7psi spring
huntertuned decapped e85 injectors 1000cc(realistically flow at 920cc)
aem 340lph fuel pump

currently on pump gas but with switch to e85 once i get it running and build/clutch broken in
offbrand 4bar map no scalar but ordering a new one so stock for now\
aem uego wideband
User avatar
CalibratEd
Posts: 90
Joined: Fri Feb 07, 2020 3:20 pm

Re: b18b1 turbo basemap needed 7psi@1000cc@340lph

Post by CalibratEd »

I can help if you can provide datalog with a wideband input. Do you need a basemap because you plan to get the car tuned? What is your goal?

-Ed
Projekt2nr
Posts: 8
Joined: Thu Feb 11, 2016 3:42 am

Re: b18b1 turbo basemap needed 7psi@1000cc@340lph

Post by Projekt2nr »

yeah i need a basemap
Post Reply