b18c4 pr3 pistons, skunk2pro intake, 70mm throttle, toda 4-2-1 exhaust

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Nogoodjam
Posts: 1
Joined: Mon Nov 02, 2020 12:01 am
Location: Russia , Orel
Contact:

b18c4 pr3 pistons, skunk2pro intake, 70mm throttle, toda 4-2-1 exhaust

Post by Nogoodjam »

Hey guys. I have b18c4 pr3 pistons, skunk2pro intake, 70mm throttle, toda 4-2-1 exhaust, CPR, aem afr. Does anyone have a similar spec, or a basemap for further customization?
attempts to use smanager basemaps for configuration have been unsuccessful. thanks to all
Donnie Walker
Posts: 1
Joined: Mon Feb 08, 2021 9:36 pm

Re: b18c4 pr3 pistons, skunk2pro intake, 70mm throttle, toda 4-2-1 exhaust

Post by Donnie Walker »

I have a similar set up and tuned on a dyno for 91 and e85. I have also fine tuned for street driving and low rpm/load.
frankiebaby357
Posts: 1
Joined: Sun Feb 14, 2021 12:10 pm

Re: b18c4 pr3 pistons, skunk2pro intake, 70mm throttle, toda 4-2-1 exhaust

Post by frankiebaby357 »

Hey bro i have simular setup would u be open to shareing the tune
Post Reply