Need help with dead times

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Oman1991
Posts: 16
Joined: Tue Apr 07, 2020 8:03 am

Need help with dead times

Post by Oman1991 »

So I've got a b20v Frankenstein setup that is tuned on stock 240cc injectors. I bought some 440cc injectors online but they didn't come with dead times so I can't get the car to start can someone help me on where to start on how to find the right dead times or if I should buy different injectors that come with dead times? And also someone tried to tell me it's too much fuel going with bigger injectors without boosting is that true?
Oman1991
Posts: 16
Joined: Tue Apr 07, 2020 8:03 am

Re: Need help with dead times

Post by Oman1991 »

here is my current calibration
Attachments
ryan tune.skl
(43.87 KiB) Downloaded 141 times
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Need help with dead times

Post by Spunkster »

I would recommend you contact the manufacturer of the injectors to get the correct dead times. If you cannot get this then you may want to consider getting injectors forma reputable manufacturer that can provide these.
Oman1991
Posts: 16
Joined: Tue Apr 07, 2020 8:03 am

Re: Need help with dead times

Post by Oman1991 »

So here is the technical data info they have
Attachments
Screenshot_20200407-215025.png
Screenshot_20200407-215025.png (359.6 KiB) Viewed 1883 times
Post Reply