B18B1 Non Turbo Basemap needed 1000cc injectors

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
jceja123
Posts: 2
Joined: Sun Dec 30, 2018 9:07 pm

B18B1 Non Turbo Basemap needed 1000cc injectors

Post by jceja123 »

Private Label MFG RMF Header
2.5" Pipe
Skunk 2 MegaPower Catback 60mm
AEM Short Ram Intake
255 Walbro
1000cc Injectors
stock internals
p28 if it matters

Car will be boosted in the future, car started leaning out at idle and cruising speed after header was installed, used to read 14.9 prior, now its reading 17.5+
***Injectors not yet installed, need basemap for that***
full throttle reading anywhere from 11-13.6
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: B18B1 Non Turbo Basemap needed 1000cc injectors

Post by Zperformance »

recheck for exhaust leak before o2 sensor.
Post Reply