turbo mini me y7/y8 id725cc need tune plz help

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
stallingsallan1
Posts: 2
Joined: Fri Feb 16, 2018 11:31 am

turbo mini me y7/y8 id725cc need tune plz help

Post by stallingsallan1 » Fri Feb 16, 2018 12:18 pm

whats up guys I'm new to the forum. I need a calibration or tune for my car I will provide all info nessicery to have the right calibration sent to me.
I want to say thanks in advance if anyone has anything close so I got a start before I go to tuner!!!

I would like to be around 12psi of boost or ill go for around 8 psi
I'm running 45psi fuel pressure at the fuel filter

D16y7 block

Dragon knife cut crankshaft
bored to 75.5mm
Eagle rods
Carillo (Cp) 9.0:1 pistons
king race bearings
Stock sleeves
Arp head studs
Arp rod bolts
Arp main
Street pro by cometic headgasket

D16Y8 Head

supertech high rpm springs
Supertech ti retainers
Stock camshaft
port and polished
stock y8 intake manifold, fuel rail, and throttle body
aem FPR
ID725cc injector dynamic injectors
(I'm running 45psi fuel pressure at fuel filter)

turbo is a t3/t4 to4e 57 trim turbo

hondata s300v3
hondata 4 bar map sensor
Hondata 4 port boost control solinoid

Tranny S40
4.250 final drive

if any other info is needed please feel free to ask thnks guys and god bless........

stallingsallan1
Posts: 2
Joined: Fri Feb 16, 2018 11:31 am

Re: turbo mini me y7/y8 id725cc need tune plz help

Post by stallingsallan1 » Sat Feb 17, 2018 2:43 pm

PLease Help

Post Reply