B18B Turbo basemap

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Maters
Posts: 3
Joined: Sat Dec 03, 2016 9:17 pm

B18B Turbo basemap

Post by Maters » Sat May 13, 2017 7:54 pm

Hi, I'm just chasing a basemap for my B18b turbo setup.

Stock long motor

Turbo is a wrx td04

Injectors
Coil Resistance: 12.5 Ohms
Static Flow Rate: 550 cc/min @ 43.5PSI ( 300kPa )
Gain: 0.12ms/MG
Offset: 0.055ms
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 300KPa
Amperage: 1.0 Amps
Pressure: Min 30PSIG/ Max 100PSIG
Variance:3%

Will be running wastegate pressure of 8psi

Stock map sensor for the minute.

Any other info needed just ask ☺️

drisdellecalgary
Posts: 1
Joined: Wed Jun 14, 2017 8:04 pm

Re: B18B Turbo basemap

Post by drisdellecalgary » Wed Jun 14, 2017 8:07 pm

hey im new to this and cant find anyone around me to help i just need a basemap for b18b turbo with 550cc injectors

Monnoracing
Posts: 110
Joined: Sun Aug 28, 2011 11:41 pm

Re: B18B Turbo basemap

Post by Monnoracing » Fri Jun 30, 2017 4:45 pm

This setup is using BBG but the injectors are Bosch 560cc and on E85 fuel.
Attachments
Michael Kudelka B18b1 WB.skl
(41.35 KiB) Downloaded 192 times

Post Reply