Need help with a built NA B20 RC440

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
HKracing
Posts: 1
Joined: Wed May 10, 2017 5:14 pm

Need help with a built NA B20 RC440

Post by HKracing »

I just built a b20 non vtec. Skunk intake, BC cams and RC440 13ohm injectors. I loaded my ecu with the stock B20 tune from hondata calibrations. It idles fine with no CEL but it's runhing really rich and throttle doesn't respond well. I need to break in the motor. it's a full on track car car so I can't drive it on the street. Any help with a base map would help
elmer456
Posts: 3
Joined: Tue May 09, 2017 8:29 am

Re: Need help with a built NA B20 RC440

Post by elmer456 »

PM SENT
Post Reply