Built B20v with 440cc Injectors Basemap needed!

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Built B20v with 440cc Injectors Basemap needed!

Post by Zosh » Fri Oct 07, 2016 7:11 pm

Does anyone have a map that's similar to my set up?

  • B20v
    fully built Gsr head
    Blox type b
    cams Super tech valve train dual Springs retainers..
    Machined head shaved
    intake side ported
    Skunk 2 pro mani Thermo tb gasket
    Skunk 2 tb (70mm)
    Inline pro fuel rail
    blox fpr
    RC 440's



BLOCK
B20b block
84.5 Ycp type r pistons
Stock rods
arp bolts

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance » Sun Oct 23, 2016 6:52 pm

This should be sufficient for a start up and daily. I would advise you to get a tune or adjust afr to be on point. Timing map is more on the conservative side. Let me know how it do and if you need anymore help.
Attachments
B20v Built basemap.skl
*Use at your own risk*
(45.71 KiB) Downloaded 219 times

Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zosh » Sun Oct 23, 2016 11:18 pm

Zperformance wrote:This should be sufficient for a start up and daily. I would advise you to get a tune or adjust afr to be on point. Timing map is more on the conservative side. Let me know how it do and if you need anymore help.

WILL DO! Thank you! I'll keep you updated!

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance » Mon Oct 24, 2016 10:41 am

You do have wideband right? Make sure afr are good

Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zosh » Mon Oct 24, 2016 12:59 pm

I have no wideband :[

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance » Mon Oct 24, 2016 9:15 pm

You would want to get a widebamd before driving the car. Overall did the basemap able to start the car and idle fine?

Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zosh » Mon Oct 24, 2016 10:11 pm

No, sadly it wouldn't stay on and im tuning in a week, would it be necessary?

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance » Tue Oct 25, 2016 12:44 pm

Would it idle and die or wont crank up?

Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zosh » Tue Oct 25, 2016 2:03 pm

Idle and die, but stays on when I keep giving it gas

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance » Tue Oct 25, 2016 2:28 pm

Check your timing with, timing gun. Since you dont have wideband cant narrow down to the problem.

Post Reply