Built B20v with 440cc Injectors Basemap needed!

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Built B20v with 440cc Injectors Basemap needed!

Post by Zosh »

Does anyone have a map that's similar to my set up?

  • B20v
    fully built Gsr head
    Blox type b
    cams Super tech valve train dual Springs retainers..
    Machined head shaved
    intake side ported
    Skunk 2 pro mani Thermo tb gasket
    Skunk 2 tb (70mm)
    Inline pro fuel rail
    blox fpr
    RC 440's



BLOCK
B20b block
84.5 Ycp type r pistons
Stock rods
arp bolts
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance »

This should be sufficient for a start up and daily. I would advise you to get a tune or adjust afr to be on point. Timing map is more on the conservative side. Let me know how it do and if you need anymore help.
Attachments
B20v Built basemap.skl
*Use at your own risk*
(45.71 KiB) Downloaded 367 times
Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zosh »

Zperformance wrote:This should be sufficient for a start up and daily. I would advise you to get a tune or adjust afr to be on point. Timing map is more on the conservative side. Let me know how it do and if you need anymore help.

WILL DO! Thank you! I'll keep you updated!
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance »

You do have wideband right? Make sure afr are good
Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zosh »

I have no wideband :[
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance »

You would want to get a widebamd before driving the car. Overall did the basemap able to start the car and idle fine?
Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zosh »

No, sadly it wouldn't stay on and im tuning in a week, would it be necessary?
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance »

Would it idle and die or wont crank up?
Zosh
Posts: 7
Joined: Fri Oct 07, 2016 6:56 pm

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zosh »

Idle and die, but stays on when I keep giving it gas
Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: Built B20v with 440cc Injectors Basemap needed!

Post by Zperformance »

Check your timing with, timing gun. Since you dont have wideband cant narrow down to the problem.
Post Reply