need b17a1 turbo basemap help

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
boostedb17eg
Posts: 2
Joined: Fri Aug 26, 2016 9:49 am

need b17a1 turbo basemap help

Post by boostedb17eg » Fri Aug 26, 2016 10:01 am

I was wondering if anyone has a basemap I could use to get to the tuner my drive is 200 miles away I do have a wideband to make sure it doesn't go lean any help would be very much appreciated...
B17a1
Garrett gt28
greddy intercooler kit
440cc injectors
Tial 38mm wastgate
greddy type-rs bov
ram horn manifold
8psi wastgate spring
2 1/2 inch exhaust no cat
walboro 255 fuel pump
stock fpr

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: need b17a1 turbo basemap help

Post by Zperformance » Tue Sep 06, 2016 5:16 pm

This should be on the richer side at full throttle. Adjust AFR where it isn't safe. timing map is a bit conservative.

*Use at your own risk*
Attachments
For BrettButter.skl
*Use at your own risk*
(47.45 KiB) Downloaded 117 times

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: need b17a1 turbo basemap help

Post by Zperformance » Tue Sep 06, 2016 5:18 pm

Let me know how it work for you. Also, looking forward how much you make :) safe trip brother

boostedb17eg
Posts: 2
Joined: Fri Aug 26, 2016 9:49 am

Re: need b17a1 turbo basemap help

Post by boostedb17eg » Wed Sep 21, 2016 4:34 pm

Thank you very much my car runs pretty good. Cruising 12.8-13.5 idles a lil rich like 12.5-13.2 and rite around 10.5-10.8 under boost I have been dailying it to work 10 miles away and runs good it will be tuned on friday ill post the before and after dyno specs im also putting it on YouTube you dont see very many b17s any more. once again thank you very much

Zperformance
Posts: 100
Joined: Thu Jul 14, 2016 12:32 pm
Location: Fresno,Ca

Re: need b17a1 turbo basemap help

Post by Zperformance » Sun Oct 23, 2016 6:39 pm

Thats awesome! Let me know how the dyno tune go and how much it made!

Post Reply