Built D16z6 vtec turbo t3/74 need base map to get it to tuner

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
ampcocd
Posts: 2
Joined: Thu Apr 28, 2016 6:55 am

Built D16z6 vtec turbo t3/74 need base map to get it to tuner

Post by ampcocd » Fri Jun 03, 2016 3:24 pm

I'm new to hondata and need to get my car running good enuff to get it to the tuner any help would be appreciated
Specs d16z6 block bored to 85mm
Eagle rods 12.5 to 1 comp pistons
D16z6 head Blox tunner series stock cams
Blox springs and titanium retainers arp head studs rod bolts and main studs
Stock intake
injectors 725cc

Post Reply