Lantecy "dead times" TRE 1600cc injectors
-
- Posts: 3
- Joined: Tue Mar 22, 2016 12:14 pm
Lantecy "dead times" TRE 1600cc injectors
having a hard time starting and idiling my car when it gets warmed up I looked and looked for answer. I tried to adjust ect + percentage table and wont do nothing JUST WANTED TO KNO IF ANYINE HERE HAD THE LATENCY FOR 1600CC INJECTORS FROM TRE "DENSO STYLE " INJECTORS....
Re: Lantecy "dead times" TRE 1600cc injectors
You should be around 1.5-1.6 ms at 12V and 1ms at 16V. eg
0.00 8.09 10.11 12.13 14.16 16.08 24.55
2.33 2.33 1.80 1.52 1.34 1.20 1.20
0.00 8.09 10.11 12.13 14.16 16.08 24.55
2.33 2.33 1.80 1.52 1.34 1.20 1.20
Hondata
-
- Posts: 3
- Joined: Tue Mar 22, 2016 12:14 pm
Re: Lantecy "dead times" TRE 1600cc injectors
would this be correct for e85?? thank u very much
-
- Posts: 3
- Joined: Tue Mar 22, 2016 12:14 pm
Re: Lantecy "dead times" TRE 1600cc injectors
also injector company said pulse should not be less than 3ms to account for the 1.3ms dead time
how do I do that....
how do I do that....
Re: Lantecy "dead times" TRE 1600cc injectors
It will be the same for all fuel. I don't understand the comment about using 3 ms. You'll need to go way below 3 ms otherwise there would not be any fuel control.
Hondata