B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
AREA876
Posts: 420
Joined: Tue Jun 15, 2010 6:14 am
Location: Jamaica

Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!

Post by AREA876 »

Use Ctrl + L to clear previous recordings
cbye
Posts: 37
Joined: Wed Jun 17, 2015 11:43 pm

Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!

Post by cbye »

Now during deceleration it leans out, does that affect estimated values??? Car is running pretty well, just striving for perfection..... I love this s300=) best thing since sliced bread!!!!! Lol
cbye
Posts: 37
Joined: Wed Jun 17, 2015 11:43 pm

Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!

Post by cbye »

but i messed with the MAP sensor min and max values for graphing and cant get it to read right now?? what are default settings????i want read down to 30in vacuum and up to 20psi??
AREA876
Posts: 420
Joined: Tue Jun 15, 2010 6:14 am
Location: Jamaica

Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!

Post by AREA876 »

Try -29.53 min and 28.82 max for MAP display
cbye
Posts: 37
Joined: Wed Jun 17, 2015 11:43 pm

Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!

Post by cbye »

Ok I'm getting the calibration more dialed in, but my idle is in 3rd column??? Is this normal??? My throttle body doesn't have adjuster screw for idle???? I'm chasing 14.7!!!!!! Idles at 1000 even thou set to 800.... should I adjust throttle plate to remain open slightly??? Seems to slam shut anyway.... it's Fullblown Motorsports 74mm?? I emailed their tech support about there being no adjuster screw and no reply!!!! Horsesh*t customer service!!!!!!!!!
Post Reply