B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!
Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!
Use Ctrl + L to clear previous recordings
Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!
Now during deceleration it leans out, does that affect estimated values??? Car is running pretty well, just striving for perfection..... I love this s300=) best thing since sliced bread!!!!! Lol
Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!
but i messed with the MAP sensor min and max values for graphing and cant get it to read right now?? what are default settings????i want read down to 30in vacuum and up to 20psi??
Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!
Try -29.53 min and 28.82 max for MAP display
Re: B16a fully Built, OBX turbo, RC1000cc, Ran good with chipped ECU, Installed s300 I cant get to run!!!!!!
Ok I'm getting the calibration more dialed in, but my idle is in 3rd column??? Is this normal??? My throttle body doesn't have adjuster screw for idle???? I'm chasing 14.7!!!!!! Idles at 1000 even thou set to 800.... should I adjust throttle plate to remain open slightly??? Seems to slam shut anyway.... it's Fullblown Motorsports 74mm?? I emailed their tech support about there being no adjuster screw and no reply!!!! Horsesh*t customer service!!!!!!!!!