Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
4 posts • Page 1 of 1
I don't have a local tuner in my area and the closest tuner is booked out a month. Trying to get a calibration that will help me put a few miles on car so I can make sure everything is working properly before I can get a tune on the setup. I have a b20 stock internals with head studs. Running RC 550 injectors walbro 255 pump. Ram horn manifold and a .57 trim t3/t4 turbo. Turbonetics wastegate 9psi spring in wastegate. I have stock b20 n/a tune to start it up it idles great and all just looking to see if anyone has a tune they are willing to share that might help me out. Thanks.
- b20T550sTuned(b20turbo 9psi) updated basemapo by fabian.skl
- (39.5 KiB) Downloaded 403 times
this help me a lot thanks for that before my car cannot past 4000 RPM now is good but the only think i do change the low rpm my car do is up and down 1000 rpm to 600 rpm i put some gas to the map in that setcion now run good