Multiple programs that are switch selectable

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
mjalaly
Posts: 87
Joined: Tue Oct 28, 2014 1:34 pm

Multiple programs that are switch selectable

Post by mjalaly »

How is this done with the S300? I want to be able to run a race setting for track days that i can select with a switch.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Multiple programs that are switch selectable

Post by Spunkster »

Details on secondary tables can be found in the help file: http://www.hondata.com/help/smanager/se ... =secondary
mjalaly
Posts: 87
Joined: Tue Oct 28, 2014 1:34 pm

Re: Multiple programs that are switch selectable

Post by mjalaly »

How many separate tables can be set up? I dont see where it clarifies that.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Multiple programs that are switch selectable

Post by Spunkster »

You can have Primary and Secondary tables.
mjalaly
Posts: 87
Joined: Tue Oct 28, 2014 1:34 pm

Re: Multiple programs that are switch selectable

Post by mjalaly »

Any chance this and/or launch control can be activated via bluetooth from a tablet? I plan to run the tablet on my center console for hondata so instead of hard wiring switches, maybe i could use that.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Multiple programs that are switch selectable

Post by Spunkster »

No, you will have to hardwire switches.
mjalaly
Posts: 87
Joined: Tue Oct 28, 2014 1:34 pm

Re: Multiple programs that are switch selectable

Post by mjalaly »

Darn, maybe that should be an option on future releases.
mjalaly
Posts: 87
Joined: Tue Oct 28, 2014 1:34 pm

Re: Multiple programs that are switch selectable

Post by mjalaly »

when i switch maps using a toggle switch, is there also a way to change the boost? Run 1 map @ say 5psi and a second amp @ 12psi??
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Multiple programs that are switch selectable

Post by Spunkster »

Please see the Help file for high/low boost control: http://www.hondata.com/help/smanager/bo ... st+control
mjalaly
Posts: 87
Joined: Tue Oct 28, 2014 1:34 pm

Re: Multiple programs that are switch selectable

Post by mjalaly »

Yes but can you assign one switch to control 2 functions or do i need two separate switches?
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Multiple programs that are switch selectable

Post by Spunkster »

as long as you set them to use the same input then yes
Post Reply