D16Y5 TURBO

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
allm0t0rGSR
Posts: 116
Joined: Tue Jun 23, 2009 10:51 pm

D16Y5 TURBO

Post by allm0t0rGSR »

STOCK MOTOR
Precision Injectors 650CC
PWM MAC SOLENOID
10 PSI

TURBO
.50 Compressor A/R
.63 Turbine A/R
3.0” Inlet / 2.0” Outlet
CAST MANIFOLD
2.5 DOWNPIPE
Attachments
HX Turbo!!!2.skl
CALI..
(35.46 KiB) Downloaded 404 times
127.s3d
DATALOG
(208.28 KiB) Downloaded 297 times
sr420det
Posts: 16
Joined: Wed Jul 16, 2008 5:57 pm

Re: D16Y5 TURBO

Post by sr420det »

what r u using on ur intake butterflys usnig the alt control ecu pin? also is this a dyno tune? power?
I have a d16z6 turbo (alot smaller than urs) on 12psi, and im super happy with the tune iv done, i just havnt done anything with the timing. I just added a lil to the stock (when it was allmotor) and took the recommended amount per psi away..
Post Reply