h22a turbo cant go past 4500 rpm at wot

Calibrations for S-Manager - Use all calibrations at your own risk (dyno tuning recommended)
Post Reply
Aliecb7
Posts: 6
Joined: Wed May 13, 2020 11:19 am

h22a turbo cant go past 4500 rpm at wot

Post by Aliecb7 »

at wot i cant get past 4500 rpm on about half or so i cant get past 4500 rpm i attached the data log and calibration
Attachments
h22 turbo last try.skl
(42.23 KiB) Downloaded 4 times
datalog 5 h22 turbo rev cuting at 4500 at wot.s3d
(38.65 KiB) Downloaded 4 times
User avatar
Spunkster
Site Admin
Posts: 19727
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: h22a turbo cant go past 4500 rpm at wot

Post by Spunkster »

It appears to be related to VTEC engaging. Check your grounds, especially the thermostat housing ground.
Aliecb7
Posts: 6
Joined: Wed May 13, 2020 11:19 am

Re: h22a turbo cant go past 4500 rpm at wot

Post by Aliecb7 »

Spunkster wrote: Tue May 04, 2021 10:41 am It appears to be related to VTEC engaging. Check your grounds, especially the thermostat housing ground.
yeah man all grounds are good i have the grounds at the thermostat along with the coil on plug ground there also
in was thinking vtec related i have powered the solenoid and it sound like it is working maybe i take it off and check if its blocked up with gunk , ill try also to disable vtec to see if problem is still there
User avatar
Spunkster
Site Admin
Posts: 19727
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: h22a turbo cant go past 4500 rpm at wot

Post by Spunkster »

Post pictures of all the grounds in the engine bay.
Post Reply