S200 > PW0 socketing

Hondata installation questions / answers / issues.
Locked
HCats
Posts: 7
Joined: Fri Dec 31, 2004 5:42 pm
Location: Jakarta
Contact:

S200 > PW0 socketing

Post by HCats »

I swap my engine to B16A Vtec with PW0 ECU, I dont know how to do socketing. I only connect the S200 to CN3 but the S200 keep blinking.
Any Jumper I have to cut or any else I have to modify? Please help.

HCats.
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

The s200 will not work on a PWO ecu. You will have to Convert the car to OBD1 in order to use an S200, this means using an OBD1 ecu, Distributor and 4 wire O2 sensor.
HCats
Posts: 7
Joined: Fri Dec 31, 2004 5:42 pm
Location: Jakarta
Contact:

Post by HCats »

Spunkster wrote:The s200 will not work on a PWO ecu. You will have to Convert the car to OBD1 in order to use an S200, this means using an OBD1 ecu, Distributor and 4 wire O2 sensor.

Thanks a lot, will come back with OBD I later.
Locked