Big mistake or little mistake w/ S100 and P28 JRSC Integra

Hondata installation questions / answers / issues.
Post Reply
teidullie
Posts: 3
Joined: Sat Sep 25, 2010 8:43 pm

Big mistake or little mistake w/ S100 and P28 JRSC Integra

Post by teidullie »

Hey guys new to the site and I have been looking around a few days on this site and from what I have a found the boost option cannot be added to the S100 chip. I have unfortunately bought one of these. I have a Integra B18B JRSC currently and I am swapping a B20B into it at the moment. I was running the JRSC with no tune and ran into problems. I have an S100 (S100R1, S100-00574, E194565) and I know this one does not have the boost option, but am I totally screwed here and unable to use it with my B20B JRSC swap? Is there another piece of equipment/hardware I could use to make this work or would I be better off buying another S100 with the boost option?

Thanks in advance
teidullie
Posts: 3
Joined: Sat Sep 25, 2010 8:43 pm

nobody

Post by teidullie »

No ideas :cry:
User avatar
Spunkster
Site Admin
Posts: 19266
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

Just upgrade to the s300 instead. You will be much better off than with the s100 anyway.

http://www.hondata.com/s300upgradeform.html
teidullie
Posts: 3
Joined: Sat Sep 25, 2010 8:43 pm

no workatound

Post by teidullie »

So there is no work around?
User avatar
Spunkster
Site Admin
Posts: 19266
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

no there is not
Post Reply