s200 launch control

Hondata installation questions / answers / issues.
Post Reply
fry
Posts: 3
Joined: Mon Sep 13, 2010 6:46 pm

s200 launch control

Post by fry »

I called hondata today, my launch control isn't working and all the options short of g sensor are enabled. when i open re4 and datalog and go to the launch control option, everything is greyed out, BUT it shows the RPM I have the launch control set to. I set my shift light just fine, but my launch control is not working. when I open up to see my sensor readings and push in the clutch, it see's that the switch is on. any help would be appreciated.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Post your calibration and a datalog showing the problem.
fry
Posts: 3
Joined: Mon Sep 13, 2010 6:46 pm

Post by fry »

Image

Image
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

don't post screenshots. You must post the calibration you are using and a datalog showing the problem.
fry
Posts: 3
Joined: Mon Sep 13, 2010 6:46 pm

Post by fry »

Spunkster wrote:don't post screenshots. You must post the calibration you are using and a datalog showing the problem.
i dont know what that is
Post Reply