Knock sensor with S300 ??

s300 and SManager software questions & answers
Locked
djxphil
Posts: 4
Joined: Wed Jan 28, 2009 7:13 am

Knock sensor with S300 ??

Post by djxphil » Fri May 01, 2009 9:38 am

Hi, i have a b16a1 withe a P30 Obd1 ECU. I would like to install a knock sensor on my car. Is it possible with an hondata S300 ?

ThanK you.

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Fri May 01, 2009 10:29 am

As long as there is an extra circuit board (knock board) screwed into the ecu then yes you can use knock control. Be aware that you may have to run the wiring in your vehicle for this.

djxphil
Posts: 4
Joined: Wed Jan 28, 2009 7:13 am

Post by djxphil » Fri May 01, 2009 10:36 am

Thanks for the answer.

How to see if i have the knock board ?. thanks

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Fri May 01, 2009 10:56 am

look inside the ecu

Masta_Cutz
Posts: 16
Joined: Sat Dec 22, 2007 11:37 am
Contact:

Post by Masta_Cutz » Sat May 02, 2009 5:36 am

Spunkster what's the dealio with swapping the knock sensor in my P13 ecu and moving it into my P72? (if i aint blown the whole thing)

is it a case of moving the tuned microphone or something more complicated?

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Mon May 04, 2009 11:47 am

You can try that.

Muckman
Posts: 11
Joined: Fri Apr 24, 2009 10:02 pm
Location: Rochester, NY
Contact:

Post by Muckman » Mon May 04, 2009 12:38 pm

Are there settings for knock control or is it just for logging?

Masta_Cutz
Posts: 16
Joined: Sat Dec 22, 2007 11:37 am
Contact:

Post by Masta_Cutz » Mon May 04, 2009 1:00 pm

I would be using them for knock control but to be able to datalog what it's doing would be even better.

the P72 has a knock sensor, would be a shame not to use it.

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Mon May 04, 2009 1:53 pm

Knock control is either on or off. Ther are not other settings. It is all internally controlled by the knock board.

Locked