Aem wideband with hondata s300

s300 and SManager software questions & answers
Locked
Teamdiesel
Posts: 12
Joined: Tue Dec 25, 2007 3:44 pm
Location: Antigua

Aem wideband with hondata s300

Post by Teamdiesel »

I have installed an AEM wideband but am having problems integrating it with the Hondata. The help files are of not much help so I need you help. I have hooked up the AEM wideband to the ELD D10 and clipped one end of the R136 & R138 resistors and cut the ELD wire and hooked the white 0-5v wire to it. Now I am having a hard time in getting my hondata AF meter in the display function to read the A/F ratio as the wideband. When the wideband is saying 13.1 the AF meter is saying 0.93. Could someone walk me through the sequence from where I am stuck?
2000' JDM CTR, 12.704 @106.38mph w/1.7 60ft
User avatar
Spunkster
Site Admin
Posts: 19548
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Go to Options, Settins and change the units tabe to read AF instead of Lambda.
panapower
Posts: 12
Joined: Fri May 26, 2006 9:56 pm
Location: NOLA
Contact:

Post by panapower »

is there a schematic for this integration with the AEM wideband sensor? thanks.
User avatar
Spunkster
Site Admin
Posts: 19548
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

It will be similar to this: http://www.hondata.com/techplxwiring.html

The AEM does not have dual outputs, this is why we only recommend the PLX widebands.
Locked