Fuel Pressure

gSIr · Post by **gSIr** » Mon Mar 12, 2007 9:24 pm

Is there any way to compensate for a change in fuel pressure. I added more fuel pressure to compensate for a set of cams I installed, but my map is really hard to tune when it shows the amount of correction needed, I was wondering if there is a way to compensate for an alternate pressure?

Post by **Hondata** » Mon Mar 12, 2007 10:19 pm

Change the overall fuel trim.

Post by **Spunkster** » Tue Mar 13, 2007 10:24 am

If the car was previously tuned and you have now changed the cams, you should get hte car retuned to take full advantage of the new cams as they need mroe timing and have very different fuel needs.

gSIr · Post by **gSIr** » Sun Apr 08, 2007 11:36 am

generally speaking, do cams usually need an ignition timing advance or retard. I pulled a few degrees of timing until i finish fine tuning my fuel maps, I'm runnin a 12:1 comp b-series with crower 63402 cams.