IAC Duty Cycle

s300 and SManager software questions & answers
Post Reply
Grabhandler
Posts: 2
Joined: Wed Jun 09, 2021 9:45 pm

IAC Duty Cycle

Post by Grabhandler »

Seems the newest software update has caused the IAC duty cycle slider to not respond to any adjustments. It was responding to movements before the update. Anyone having this issue other than me?
Top
User avatar
Spunkster
Site Admin
Posts: 22820
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: IAC Duty Cycle

Post by Spunkster »

I have tested this and it is working as it should. Make sure you have uploaded your calibration when trying to make live changes and make sure you have realtime updates turned on.
Top
Grabhandler
Posts: 2
Joined: Wed Jun 09, 2021 9:45 pm

Re: IAC Duty Cycle

Post by Grabhandler »

Spunkster wrote: ↑Thu Jun 10, 2021 12:57 pm I have tested this and it is working as it should. Make sure you have uploaded your calibration when trying to make live changes and make sure you have realtime updates turned on.
Where is the “real time updates” located? Thanks Spunkster
Top
User avatar
Spunkster
Site Admin
Posts: 22820
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: IAC Duty Cycle

Post by Spunkster »

In the Options menu.
Top
Post Reply

Return to “s300 / SManager”