Vtec not working when launch control is enabled

s300 and SManager software questions & answers
Post Reply
Blackoutthd
Posts: 7
Joined: Sat Jun 15, 2019 2:11 pm

Vtec not working when launch control is enabled

Post by Blackoutthd »

Vtec only works when launch control is disabled and it dose not work when launch control is enabled
P28 s300 obd1 1995 honda eg
I need 2 step for drag strip please help
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Vtec not working when launch control is enabled

Post by Hondata »

Set the minimum speed to 0
Hondata
Blackoutthd
Posts: 7
Joined: Sat Jun 15, 2019 2:11 pm

Re: Vtec not working when launch control is enabled

Post by Blackoutthd »

Set launch control or vtec to minimum 0 mph
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Vtec not working when launch control is enabled

Post by Spunkster »

What input are you using for launch control activation?
Blackoutthd
Posts: 7
Joined: Sat Jun 15, 2019 2:11 pm

Re: Vtec not working when launch control is enabled

Post by Blackoutthd »

I think it's just on mph but I do have my clutch safety switch looped you think that could cause an issue?
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Vtec not working when launch control is enabled

Post by Spunkster »

If you have it set to always on, then my question is not relevant.
Blackoutthd
Posts: 7
Joined: Sat Jun 15, 2019 2:11 pm

Re: Vtec not working when launch control is enabled

Post by Blackoutthd »

I'll have to check when I get home but I dont have to hit any buttons my tuner set it up
Blackoutthd
Posts: 7
Joined: Sat Jun 15, 2019 2:11 pm

Re: Vtec not working when launch control is enabled

Post by Blackoutthd »

It is set to always on and it's on mph I just want launch control and vtec
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Vtec not working when launch control is enabled

Post by Spunkster »

Post your calibration as well as a datalog showing the issue.
Blackoutthd
Posts: 7
Joined: Sat Jun 15, 2019 2:11 pm

Re: Vtec not working when launch control is enabled

Post by Blackoutthd »

I'll do some datalogging tomorrow it's raining thanks I'm just trying to figure it out I'm so puzzled
Blackoutthd
Posts: 7
Joined: Sat Jun 15, 2019 2:11 pm

Re: Vtec not working when launch control is enabled

Post by Blackoutthd »

I snapped my axcle but once I get my new ones I'll do some data logging I'm still trying to data log for you I tried to put it on brake switch but that didnt work either unfortunately
Post Reply