D2 light flashing red

s300 and SManager software questions & answers
Post Reply
Anthony111
Posts: 7
Joined: Wed Feb 03, 2021 9:53 am

D2 light flashing red

Post by Anthony111 »

So I recently just finished installing an s300v3 into my p28 and when I plugged it Into the laptop d2 flashes red. It loads up calibrations fine. When I start the car and turn data logging on by pressing the yellow lightning bolt it gives me some real time data, but the d2 continues to flash red. What does this mean?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: D2 light flashing red

Post by Hondata »

That LED indicates communication the S300 and ECU. eg when datalogging Next time I'll only put green LEDs on the board.
Hondata
DaX
Posts: 654
Joined: Tue Mar 18, 2003 3:48 pm

Re: D2 light flashing red

Post by DaX »

Hondata wrote: Fri Feb 05, 2021 5:28 amNext time I'll only put green LEDs on the board.
LoL
Anthony111
Posts: 7
Joined: Wed Feb 03, 2021 9:53 am

Re: D2 light flashing red

Post by Anthony111 »

How do I do that?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: D2 light flashing red

Post by Hondata »

It's normal. Your S300 is fine.
Hondata
Anthony111
Posts: 7
Joined: Wed Feb 03, 2021 9:53 am

Re: D2 light flashing red

Post by Anthony111 »

Okay thanks man.
Post Reply