Integra Crank no Start - S300 Code 21

s300 and SManager software questions & answers
TurboTeg332
Posts: 75
Joined: Thu Jul 25, 2019 1:50 pm

Re: Integra Crank no Start - S300 Code 21

Post by TurboTeg332 »

Try this.
Attachments
B18SuperStallError2.skl
(49.16 KiB) Downloaded 81 times
TurboTeg332
Posts: 75
Joined: Thu Jul 25, 2019 1:50 pm

Re: Integra Crank no Start - S300 Code 21

Post by TurboTeg332 »

Loaded JDM stock B18C 240cc injectors calibration.

Car will not start only cranks. No error codes but was throwing knock sensor code earlier. Car ran fine on stock ECU and with S200 computer J1 cut.

Attached is the datalog recording. Noticed the tach jumps a little when turning key to the ON position and car tries to deisel with key in ON position sometimes when S300 unit plugged up.
Attachments
CrankNoStart JDM Stock B18C1 240cc.s3d
(939.3 KiB) Downloaded 82 times
Post Reply