Somewhat Random Rev limit cut.

s300 and SManager software questions & answers
Post Reply
Mafia
Posts: 33
Joined: Mon Jun 09, 2008 4:35 pm

Somewhat Random Rev limit cut.

Post by Mafia » Fri Sep 13, 2019 1:42 pm

I started having this issue Last 2 track events, Cant figure out what's causing my rev limit issues, seems like it happens at end of gear, and wont turn off for 5-10 seconds

Please let me know of any ideas.

I'm on V 2.7.2.0
Attachments
trackshutoff.s3d
log
(388.89 KiB) Downloaded 12 times
DavidFinalfirebird.skl
map
(43.23 KiB) Downloaded 10 times
Eg 800hp - Track car
Eg 580hp - daily

User avatar
Spunkster
Site Admin
Posts: 17935
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Somewhat Random Rev limit cut.

Post by Spunkster » Fri Sep 13, 2019 3:02 pm

What is the serial umber of the s300 board inside the ECU.

From Help, About, what is the version of software you are using?

Mafia
Posts: 33
Joined: Mon Jun 09, 2008 4:35 pm

Re: Somewhat Random Rev limit cut.

Post by Mafia » Fri Sep 13, 2019 3:56 pm

serial number is 31793

version 2.7.2.0
Eg 800hp - Track car
Eg 580hp - daily

User avatar
Spunkster
Site Admin
Posts: 17935
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Somewhat Random Rev limit cut.

Post by Spunkster » Fri Sep 13, 2019 4:31 pm

UPdate to the newest version of software and reupload the calibration to the ECU using the new software and see if the problem persists.

Post Reply