air con problem

s300 and SManager software questions & answers
Post Reply
User avatar
Spunkster
Site Admin
Posts: 22799
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: air con problem

Post by Spunkster »

It sounds like there is no problem then.
Top
haRRibo
Posts: 24
Joined: Tue Sep 17, 2013 9:01 am

Re: air con problem

Post by haRRibo »

But where is a problem? In hondata settings?

What to do? I can´t run a car on ECU with disconected Hondat.
Top
User avatar
Spunkster
Site Admin
Posts: 22799
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: air con problem

Post by Spunkster »

You need to try this ECU on a different known working vehicle.
Top
haRRibo
Posts: 24
Joined: Tue Sep 17, 2013 9:01 am

Re: air con problem

Post by haRRibo »

OK I will do soon
Top
topsimportgarage
Posts: 14
Joined: Thu Mar 03, 2022 3:18 pm

Re: air con problem

Post by topsimportgarage »

haRRibo wrote: ↑Sat Jun 20, 2020 11:39 am OK I will do soon
Any updates on this? Im running into the same problems on my setup. Ive seen a few other post about AC clutch not working with the S300 and nothing concrete it was resolved by either S300 setting or externally.
Top
euroslo24
Posts: 5
Joined: Wed Aug 31, 2011 3:30 pm

Re: air con problem

Post by euroslo24 »

running into the same issue
b5 input works correct
a15 output does not ground
if i play with nitrous output with a15 and invert it i can get it to ground the clutch but this is not a permanent solution
Top
User avatar
Spunkster
Site Admin
Posts: 22799
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: air con problem

Post by Spunkster »

Most likely it is an issue with the ECU itself as they are over 25 years old and may be damaged.
Top
Post Reply

Return to “s300 / SManager”