remove fan switch? enable fan with set ect?

s300 and SManager software questions & answers
Post Reply
lindseyhunt1090
Posts: 4
Joined: Tue Jun 08, 2010 10:42 am

remove fan switch? enable fan with set ect?

Post by lindseyhunt1090 » Mon Mar 18, 2019 5:47 pm

hey guys. currently building a new wire harness for my 2000 Integra ( b18 ) just wondering, Hondata has the force rad fan on at a set temperature. the factory fan comes on with the thermal switch thats located on the thermostat housing. that's a mechanical switch. since Hondata has the force fan on at whatever ect you desire that means it doesn't use the thermal switch. so does this mean i can just ditch the thermal switch all together?

User avatar
Spunkster
Site Admin
Posts: 18008
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: remove fan switch? enable fan with set ect?

Post by Spunkster » Tue Mar 19, 2019 9:39 am

The thermal switch should still be used in case of failure as the ECU is just there as a backup or if you want the temp a little lower.

Post Reply