solenoid wiring
solenoid wiring
I have a clutch flow controller installed that has an electronic line lock to activate it. I am going to wire it to the ecu via nit/aux 1 and use the parameters to activate it in first gear on launching via speed etc. I have a relay to wire in, is it the same wiring schematics used for the nitrous solenoid? Thanks
Re: solenoid wiring
Without more details of this line locker it is really hard to say.
Re: solenoid wiring
Here's the link to the actual one
http://www.biondoracing.com/product/LL.html
http://www.biondoracing.com/product/LL.html
Re: solenoid wiring
Since there is no info on how to wire this or any specifics given on that page, it is hard to say how it should be wired exactly. You can try using the same instructions s the nitrous control and see if that works.
Re: solenoid wiring
Here's the instructions that came with the solenoid
- Attachments
-
- _20170726_215409.JPG (174.85 KiB) Viewed 4753 times
Re: solenoid wiring
Is this correct?
- Attachments
-
- received_10103183198052653.jpeg (75.33 KiB) Viewed 4753 times
Re: solenoid wiring
It should be wired exactly like the nitrous solenoid in the help file: http://www.hondata.com/help/smanager/ni ... ub=nitrous
Re: solenoid wiring
Excellent thanks, so 30 and 86 go to the same 12v switched source
Re: solenoid wiring
Thanks again Spunkster!!! Always great service!!
Re: solenoid wiring
Is this the same as in KPRO?
I'm trying to do the exact same thing.
I'm trying to do the exact same thing.