Hondata s300 red led flashing fast

s300 and SManager software questions & answers
jose_mbk
Posts: 18
Joined: Sun Jan 22, 2017 8:27 pm

Hondata s300 red led flashing fast

Post by jose_mbk »

My English is bad, I will use a translator. Install my honda s300 v3 in my Honda Prelude SH. Smanager does not read the engine parameters in real time. A red light flashes quickly, not before. When I connect to the PC without connecting to the vehicle also red light that blinks. What can be the motive?

jose_mbk
Posts: 18
Joined: Sun Jan 22, 2017 8:27 pm

Re: Hondata s300 red led flashing fast

Post by jose_mbk »

The red light no longer appears but if I have the revolutions limited to 2500rpm. I have inspected the harness and it looks like it is perfect. The welds are perfect. I cut the j12. J4 I have not cut it because I read that it is not relevant. So I do not know what to do anymore.

User avatar
Spunkster
Site Admin
Posts: 19139
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Hondata s300 red led flashing fast

Post by Spunkster »

Is this in a rectangular ECU or a square ECU?

jose_mbk
Posts: 18
Joined: Sun Jan 22, 2017 8:27 pm

Re: Hondata s300 red led flashing fast

Post by jose_mbk »

37820-p28-g02 AWR
Is rectangular

User avatar
Spunkster
Site Admin
Posts: 19139
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Hondata s300 red led flashing fast

Post by Spunkster »

Have you enabled on-board datalogging?

jose_mbk
Posts: 18
Joined: Sun Jan 22, 2017 8:27 pm

Re: Hondata s300 red led flashing fast

Post by jose_mbk »

I'll check in a moment

jose_mbk
Posts: 18
Joined: Sun Jan 22, 2017 8:27 pm

Re: Hondata s300 red led flashing fast

Post by jose_mbk »

Is not activated. The light only blinks when I connect the pc, I suppose that's why. My problem now is that it does not rise from 2500rpm and in idle it goes off

User avatar
Spunkster
Site Admin
Posts: 19139
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Hondata s300 red led flashing fast

Post by Spunkster »

so you are saying the red light stops flashing when it idles?

jose_mbk
Posts: 18
Joined: Sun Jan 22, 2017 8:27 pm

Re: Hondata s300 red led flashing fast

Post by jose_mbk »

The red light blinks only when the PC is connected. Now I have the problem of protection mode

User avatar
Spunkster
Site Admin
Posts: 19139
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Hondata s300 red led flashing fast

Post by Spunkster »

What is the serial number that is on the s300 board inside the ECU?

From Help, About, what is the version of software you are using?

jose_mbk
Posts: 18
Joined: Sun Jan 22, 2017 8:27 pm

Re: Hondata s300 red led flashing fast

Post by jose_mbk »

Serial number Hondata: 39248
Serial number ECU: 37820-p28-g02
Hardware: version 3
Firmware: version 8
Software: version 2.5.5

User avatar
Spunkster
Site Admin
Posts: 19139
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Hondata s300 red led flashing fast

Post by Spunkster »

Have you uploaded the calibration to the ECU using this version of software? Are you able to datalog?

jose_mbk
Posts: 18
Joined: Sun Jan 22, 2017 8:27 pm

Re: Hondata s300 red led flashing fast

Post by jose_mbk »

I have uploaded the calibration with this version on two different PCs. I can not do datalog because it does not read the sensors. Even if it starts, it's strange

User avatar
Spunkster
Site Admin
Posts: 19139
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Hondata s300 red led flashing fast

Post by Spunkster »

Has the s300 ever worked on this ECU?

Where are you located?

jose_mbk
Posts: 18
Joined: Sun Jan 22, 2017 8:27 pm

Re: Hondata s300 red led flashing fast

Post by jose_mbk »

I dont understand that question. I live in Cadiz, Spain

Post Reply