Hey!
Tuned my car last weekend and i was supprised when the AEM wideband showed 10.5 and the datalog wouldn't go lower then 12.1 AF.
The offset is set perfect in the car, AEM shows 14.7 and datalog shows 14.7.
Also, i wonder why the ecu wont go from closed loop to open loop?
The wideband is hooked up to ELD (D10).
Any ideas how to set this right?
Datalog wont go lower then 12.1 AF
Datalog wont go lower then 12.1 AF
- Attachments
-
- b16a2 10-11 komp 880cc e85 klar i bil.skl
- (43.09 KiB) Downloaded 85 times
-
- Datalog-130523-019.s3d
- (398.92 KiB) Downloaded 96 times
Re: Datalog wont go lower then 12.1 AF
Have you removed the resistors as it says in the help file? http://www.hondata.com/help/smanager/wi ... ghtsub=d10
Re: Datalog wont go lower then 12.1 AF
Dont have a US ECU. Got a european P30.Spunkster wrote:Have you removed the resistors as it says in the help file? http://www.hondata.com/help/smanager/wi ... ghtsub=d10
Re: Datalog wont go lower then 12.1 AF
What wideband are you using?
Re: Datalog wont go lower then 12.1 AF
IT may be a european ECU, but you must still remove the resistors.