Hondata Map Sensor Question

s300 and SManager software questions & answers
Post Reply
ITR 1102
Posts: 148
Joined: Sun Sep 10, 2006 9:52 am
Location: Topeka, KS

Hondata Map Sensor Question

Post by ITR 1102 » Mon Oct 31, 2011 7:06 pm

For lower boost setups such as mine, which Hondata map sensor is the best to use? I like the idea of the presets in the software for the 4 bar sensor, but there are not presets for the 3 bar sensor. I have read about a loss of resolution with the higher the sensor's bar rating, but don't know if that is applicable to the Hondata/Omni Power type sensors. I will have between 12 and 13 psi on the motor. Will there be any advantage to using the 3 bar over the 4 bar?

User avatar
Site Admin
Posts: 18025
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Hondata Map Sensor Question

Post by Spunkster » Tue Nov 01, 2011 9:13 am

There is no advantage and you will not loose any resolution. The 4bar works perfectly.

Post Reply