vtec spool error code

s300 and SManager software questions & answers
Post Reply
99gsrBHOLTZ
Posts: 3
Joined: Tue Oct 11, 2011 10:58 am

vtec spool error code

Post by 99gsrBHOLTZ »

yes im having an issue with vtec engagment. I have a pr4 ecu with hondata S300 in jdm gsr. I uploaded the itr stock basemap also saved the one the previous tuner dicked me on just incase. So when going to take the car for a test drive i cracked it in first vtec came in very strong like its suppose to when i shift in to second then it threw error code for vtec spool and know after i cleared the code i still have check engine light and vtec wont engage. Thanks in advance.
MotorMo
Posts: 31
Joined: Mon Aug 22, 2011 7:18 am

Re: vtec spool error code

Post by MotorMo »

As strange as it may sound, in my experiance, the majority of vtec codes are caused by low oil levels. Make sure your oil if full. Im assuming u have a 21, or 22 code? They both have different diagnostic flow charts....my 2 cents, hope it helps. list what code u got...
ITR1102
Posts: 46
Joined: Tue Jan 26, 2010 8:34 am

Re: vtec spool error code

Post by ITR1102 »

Disable VTEC spool error check in the VTEC parameters.

At the very least post a calibration so we can see what you are working with. Or follow the rules and post a calibration and datalog....
Post Reply