Punching Out the USB Hole

s300 and SManager software questions & answers
Post Reply
7rrivera7
Posts: 130
Joined: Wed Nov 13, 2002 3:01 pm

Punching Out the USB Hole

Post by 7rrivera7 »

I've been installing several S300's lately and I'm spending too much time punching out the hole with a Dremel (I'm anal about how it looks). Is there anternative/shortcut/better method of preparing the ECU case?
User avatar
Hondata
Site Admin
Posts: 10434
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Re: Punching Out the USB Hole

Post by Hondata »

Make two vertical cuts with a hacksaw. Break off the tab with pliers. Smooth with file.

BTW this is not how we do it here - we have a milling machine.
Hondata
locash
Posts: 288
Joined: Sat Mar 20, 2004 11:27 am
Location: Phoenix, AZ
Contact:

Re: Punching Out the USB Hole

Post by locash »

If you have access to a drill press, you can use an end mill..

Something like this will make a nice flat bottom..

http://www.amazon.com/dp/B003BIEUZY/ref ... B003BIEUZY
Locash Racing, LLC
Hondata Sales and Tuning
Dynapack 4000 2wd Dyno
In-Shop CNC Machining and Product Manufacturing
Post Reply