Thinking of switching from boosted s200 to s300

s300 and SManager software questions & answers
Post Reply
R.A.T.
Posts: 23
Joined: Fri May 05, 2006 1:16 pm

Thinking of switching from boosted s200 to s300

Post by R.A.T. » Tue Jun 01, 2010 2:37 pm

Im thinking of switching my boosted s200 to a s300 and I already have a boost controller on my car.
Can I run the s300 without the s300 boost controller option or is it like the s200 where in order to run boost you have to purchase the boost option?

User avatar
Spunkster
Site Admin
Posts: 18006
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Tue Jun 01, 2010 2:41 pm

All s300s come with all options. The boost control the s300 uses is dependant on certain components being installed in the ECU to operate a PWM boost control solenoid.

R.A.T.
Posts: 23
Joined: Fri May 05, 2006 1:16 pm

Post by R.A.T. » Tue Jun 01, 2010 2:54 pm

Spunkster wrote:All s300s come with all options. The boost control the s300 uses is dependant on certain components being installed in the ECU to operate a PWM boost control solenoid.
In other words I would not be able to use the launch control with anti-lag?
If not, will I at least be able to use the launch control without the anti-lag?


For the anti-lag to work will I be able to simply T the vacuum lines into my boost controller? (Im not interested in the boost by gear)

User avatar
Spunkster
Site Admin
Posts: 18006
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Tue Jun 01, 2010 3:47 pm

launch control and anti-lag have nothing to do with boost control.

R.A.T.
Posts: 23
Joined: Fri May 05, 2006 1:16 pm

Post by R.A.T. » Tue Jun 01, 2010 4:06 pm

Spunkster wrote:launch control and anti-lag have nothing to do with boost control.
Cool!
Next question:
I have the version4 s200, can I transfer over my calibrations to the s300?
If yes, how?

ITR 1102
Posts: 148
Joined: Sun Sep 10, 2006 9:52 am
Location: Topeka, KS
Contact:

Post by ITR 1102 » Tue Jun 01, 2010 4:20 pm

R.A.T. wrote:
Spunkster wrote:launch control and anti-lag have nothing to do with boost control.
Cool!
Next question:
I have the version4 s200, can I transfer over my calibrations to the s300?
If yes, how?
SManager allows you to open the .bin or .re4 calibration. It will be more than a good starting point, but I think you will still have to do a little retuning.

The S300 has a lot more options and compensation tables than the S200.

R.A.T.
Posts: 23
Joined: Fri May 05, 2006 1:16 pm

Post by R.A.T. » Tue Jun 01, 2010 5:21 pm

ITR 1102 wrote:
R.A.T. wrote:
Spunkster wrote:launch control and anti-lag have nothing to do with boost control.
Cool!
Next question:
I have the version4 s200, can I transfer over my calibrations to the s300?
If yes, how?
SManager allows you to open the .bin or .re4 calibration. It will be more than a good starting point, but I think you will still have to do a little retuning.

The S300 has a lot more options and compensation tables than the S200.
Spunkster, is this correct?

User avatar
Spunkster
Site Admin
Posts: 18006
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Wed Jun 02, 2010 9:20 am

you can import an RE4 file in Smanager

R.A.T.
Posts: 23
Joined: Fri May 05, 2006 1:16 pm

Post by R.A.T. » Wed Jun 02, 2010 10:51 am

Spunkster wrote:you can import an RE4 file in Smanager
As mentioned above by someone else, will I need to retune the car?

User avatar
Spunkster
Site Admin
Posts: 18006
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Wed Jun 02, 2010 11:08 am

You may have to make some adjustments

Post Reply