2005 UK EP3 K20A2 PRA Intake and exhaust map required

K-Series Programmable ECU Calibration updates / downloads
Post Reply
r2isy
Posts: 3
Joined: Thu Jul 08, 2021 3:57 am

2005 UK EP3 K20A2 PRA Intake and exhaust map required

Post by r2isy »

Cars spec -
k20a2 engine with pra ecu kpro v2
stock inlet manifold (code: prb I think)
4-2-1 manifold
skunk2 2.75" megapower exhaust
tegiwa induction kit (gruppe m)
stock ep3 injectors, stock tb

Does anyone have a file for this setup/similar setup?

or does anyone have a tune with the same setup but for a prc inlet manifold
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 2005 UK EP3 K20A2 PRA Intake and exhaust map required

Post by CalibratEd »

I can assist you with a tune. Does the car have a working wideband?

-Ed
r2isy
Posts: 3
Joined: Thu Jul 08, 2021 3:57 am

Re: 2005 UK EP3 K20A2 PRA Intake and exhaust map required

Post by r2isy »

CalibratEd wrote: Fri Jul 09, 2021 7:23 pm I can assist you with a tune. Does the car have a working wideband?

-Ed
it is just running the 2 stock o2 sensors
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: 2005 UK EP3 K20A2 PRA Intake and exhaust map required

Post by CalibratEd »

r2isy wrote: Sat Jul 10, 2021 2:16 am
CalibratEd wrote: Fri Jul 09, 2021 7:23 pm I can assist you with a tune. Does the car have a working wideband?

-Ed
it is just running the 2 stock o2 sensors
Ok, reach it to me if you install a wideband. I can not assist you if I can not get an AFR reading.

-Ed
Post Reply