Need Help! K20z3 engine calibrations

K-Series Programmable ECU Calibration updates / downloads
Post Reply
atiernan
Posts: 1
Joined: Sat Mar 27, 2021 1:10 pm

Need Help! K20z3 engine calibrations

Post by atiernan »

Hey!

New to using Hondata and Kpro/Kmanager software, currently running a 94 octane tune on my 02 Civic SiR (k20z3 Swapped & LSD 6 speed manual swapped) it dyno tested at 220whp & 174lbs of torque and I am wanting to change this to a 91 octane tune. Just wondering if anyone knows how to help and what to set up in the software to make this happen. tried looking at some of the calibrations inside KManager. Also wondering if the KManager K20a2 engine calibrations would work? or if I have to use a K20z3 engine calibration?

thank you!
User avatar
CalibratEd
Posts: 1430
Joined: Fri Feb 07, 2020 3:20 pm

Re: Need Help! K20z3 engine calibrations

Post by CalibratEd »

If I understood correctly, the car is already tuned on 94 and you want to run 91. I suggest you datalog the car and monitor for knock and then reduce the timing.

- Ed
Post Reply